Key words:

Products News Download

Soft glue pre-coated-capsule fixed anti-loose type


Similar to the principle of A and B glue, the hardener and the main agent coated in the fine capsule are evenly mixed, processed and coated on the workpiece, and the surface is dried and stored. When the screw and the nut are locked, the fine capsule will be squeezed and the main agent will be combined with the hardener to produce curing effect, thus achieving the effect of fixing and preventing loosening. When in use, the screw-in torque is low, and the disassembly torque required after curing is large, which is basically a one-time product.

Key words:

Soft glue pre-coating-liquid sealing anti-loose type


It is a liquid anti-leakage glue, similar to silica gel and liquid nylon glue coated on the screw teeth, dried after use, can obtain anti-loose sealing effect, can also be reused. A certain screwing torque is required. The required screwing torque is larger than that of the capsule fixing anti-loosening type, but the disassembly torque is smaller than that of the locking torque and gradually decreases due to repeated use. Advantages: 1. Because it is a 360-degree construction, the friction force is average when locking, and it has anti-loosening, sealing and leak-proof functions. 2. can be low temperature construction, for the surface quality is easy to maintain good. 3. There will be no contamination of debris powder, affecting the quality.

Key words:

Rigid pre-coating


That is, the nylon clamp sheet NylonPatch uses the friction resistance, impact resistance and reusable characteristics of nylon to coat the nylon powder on the screw. When in use, the friction of nylon will produce a 100% fit between the full tooth section of the opposite screw and the nut to meet the requirements of locking.

Key words:

LTE hard automatic coating production equipment


HT412 is suitable for producing M4 ~ M12 and M2 ~ M12 specifications, about 150PCS-350PCS per minute, which varies depending on the screw size. HT412D is suitable for producing M4 ~ M12 and M2 ~ M12 specifications, with dual functions, and can be used as tightening screws. One side is a standard screw. The speed of attaching the screw depends on the loading and unloading of workers. The speed of the standard part is 150PCS-300PCS, which will change due to different screw size. HT14 specializes in the production of M1 ~ M4 specifications of precision small screws, such as glasses, watches, NB, etc.

Key words: