All

All
Product Management
News
Introduction
Enterprise outlets
FAQ
Enterprise Video
Enterprise Atlas

AST anti-slip coating series

Home page

Slip is the number one killer of sane people maiming on the factory floor. If someone slips at your facility and is injured, you must pay the appropriate medical expenses. The anti-skid solution of Caiyong AST products can well protect you and your working partners.

Classification:

AST American anti-slip coating

Tag:

LTE

Message

Product Details

AST anti-slip coating

In the United States, every personal injury lawyer can find out.

Slip is the number one killer of sane people maiming on the factory floor.
If someone slips at your facility and is injured, you must pay the appropriate medical expenses. The anti-skid solution of Caiyong AST products can well protect you and your working partners.

The same cost as ordinary paint, but the duration is 5 times longer.

The most common way of sliding treatment is to add sand to the floor paint, but this product has poor anti-skid effect and poor durability.
The sand in ordinary non-slip products is easy to peel off, there are safety hazards, and people are easy to slip and fall.
The secondary anti-slip coating, need to spend a high cost.

Every factory manager will tell you that the cost of any preparation is much greater than the cost of the product itself. Not to mention the loss of labor and time caused by downtime due to reverse repair construction.

Harsh test conditions

AST anti-skid coating products were initially applied to the deck of the US aircraft carrier anti-skid. Nearly 40 years of use has proved that the anti-skid function of this product is very good to protect the safety of US Navy personnel and equipment operation. According to the requirement of "controlled impact" in military terminology, our coating material has successfully passed the test and certification of 15000 times that a jet aircraft weighing 27 tons hit the road at a speed of more than 274 km/h.
In addition, AST anti-slip coating also has the characteristics of chemical corrosion resistance, jet fuel, aqueous liquid lubricating oil, grease, crude oil and salt spray and other characteristics. If the AST anti-skid coating can easily withstand the strong impact of jet aircraft on the ground, then the AST anti-skid coating can also easily meet the requirements of heavy forklifts and heavy vehicles on road conditions.

AST non-slip coating material technology is the only non-slip product specially designed for the US Navy and has passed the test and certification. If applied in your factory, you can enjoy military-grade anti-slip protection and up to 5 times the service life of the reference sand paint.

Exceeds OSHA, USDA, ADA standards

AST non-slip coating materials far exceed the strict standards of OSHA, USDA and ADA.
The product passed the ASTM test,
Includes:

-F -510 long wear test
-D-Number of collision systems of 2794 to falling bodies
-D -1894 test maximum friction coefficient in wet and dry environments;

A batch of AST non-slip coating materials will be tested in a certified factory before shipment.

Ordinary sand-mixed coating	AST anti-slip coating
Not built in heavy load, heavy traffic areas to use Poor resistance to impact and chemical corrosion Low anti-friction surface, low anti-slip effect Use period is only 6-9 months	Meet the requirements of heavy forklifts and heavy vehicles for road conditions Excellent impact and chemical resistance High friction, high anti-slip ability 30-45 months

No matter where you are, AST non-slip coating can provide you with safety services

	AS - 75	This is a one-component, low volatile, synthetic rubber polymer, suitable for pedestrian traffic pavement, and a special material that is compatible with asphalt. The non-slip surface of the product stroke can resist all kinds of bad weather, especially in humid environments. Because it is a water-based paint, it is easy to clean quickly. Can be used in asphalt, paint, concrete or wood and other surfaces, whether it is a slope or a plane can form the wear-resistant non-slip coating that Ning needs. Salt colors are black, gray, brick red and yellow.
	AS - 150	A single-component product that is ready to use out of the bottle and continues to be used after sealing. Can withstand heavy load, light rolling transport, fire, resistant to gasoline, crude oil, sea water, acid, alkali, fat solvent. For indoor floor, slope, deck, warehouse entrance, buffer, tread, mechanical repair shop or other production equipment factory has a good anti-skid wear effect. The colors are gray, black, brick red and yellow.
	AS - 175	Two-component, low volatile, water-based epoxy medium particle products, can be automatically sealed, suitable for wet and slippery ground use. Easy to clean, chemical resistance, especially in amusement facilities, swimming pools, cloakrooms, shower rooms, cruise ships, decks, docks, laundries and sidewalks. The product has a high coverage rate, is a high cost-effective products. Colors are light gray, black, beige, brick red and yellow.
	AS - 250	Heavy duty type, two-component ring coating, can withstand heavy vehicles to the maximum. Fire resistance, acid, alkali, solvent, grease, crude oil, sea water, detergent, alcohol, gasoline, water, liquid and all kinds of weather erosion. It is suitable for inclined slope road and pedestrian road. The colors are gray, black, brick red and yellow.
	AS - 550	Ultra-heavy duty type, extremely high chemical resistance, two-component, high solid composition, low volatile epoxy non-slip coating material. Easy to clean, can be widely used in manual fuel depots, transportation systems, maintenance plants, workshops, commercial fishing grounds, chemical and printing plants. The colors are gray, black, brick red and yellow.
	AS - 2500	Ultra-heavy duty, extremely high chemical resistance, two-component, 100% solids, zero-volatile, low-odor epoxy non-slip coating, with unquestionable strength as AS -550. The zero-volatilization characteristic makes it suitable for indoor food processing areas, meat packaging and poultry operations areas, winemaking farms, wine brewing farms, bakeries, canning farms and hospitals, or other low-ventilation locations. The colors are gray, black, brick red and yellow. The product can also be rapidly cured and air dried.

	Theoretical coating area Square meters per gallon			volatile value			Compliance with OSHA; ADA & SDA Standards	Table dry time 21oUnder C conditions		Applicable Time @ 21oC	Friction coefficient (ASD min. = .6)
	Drum	Cloth towel	Splash	pounds per gallon	g/L	solid substance Percentage	X	light-load traffic	heavy load traffic	X	Drying surface	Wet surface
AS - 75	7	X	12.5	0.34	42	68	Yes	3~4	14	NA	1.3	0.9
AS - 150	5	4	6	0.82	98	61	Yes	12	72	NA	1.17	1.0
AS - 175	9	X	12	0.5	60	63	Yes	24	48	1	0.78	0.86
AS - 250	4	5	6	2.0	250	71	Yes	12	48	4	1.05	1.05
AS - 550	3	4.5	6	0.75	90	89	Yes	12	24	1	0.88	0.93
AS - 2500	2.5 ~3.5	4	6	0	0	100	Yes	24	48	1	1.1	1.0

Quality assurance: AST products can still show high-performance anti-skid effect under harsh environmental conditions.

Beige *-Beige	Gray-Gray	Tile Red-Brick

Light Gray *-Light Grey	Black-Black	Safety yellow

PS-100WB primer

Increase the adhesion of the coating to high water permeability ground, such as concrete, wood or brick.

MS-7CZ metal primer

Apply to metal surfaces to prevent anti-rust, increase coating adhesion, and even resist the erosion of seawater and chemical products.

None

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible

National Service Hotline:

86-769-85331369

Fax: 886-3-3693383

E-mail：loctai@loctai.com.tw

Company Headquarters: No. 255, Fuxing 2nd Street, Zhongfuli 12, Luzhu District, Taoyuan City, 338

Taiwan Address: No.1, Lane 212, Section 2, Gongdao Fifth Road, hsinchu city, Taiwan

Here is the title one h1 placeholder text

Sweep the attention to us

Business License