High flow shaft valve

Home page

The shaft rubber valve can be widely used, such as: flux, oil, RTV silicon Likang, UV curing adhesive, solder paste.

Classification:

Dispensing valve (Techcon)

Tag:

LTE

Message

Product Details

Product Introduction

TS941 high pressure shaft rubber valve

The shaft rod valve can provide accurate dispensing with fluids of various materials and different viscosities by "higher than the amount of glue"; the shaft rod valve has the functions of "suction back" anti-dripping and fast ON/OFF distribution, which is not affected by the input pressure of the liquid; the optional oil chamber is made into an additional liquid seal to prevent moisture from attaching to the shaft rod, which is especially excellent for handling moisture-sensitive materials; the fear valve is a pneumatic valve, which can be operated by internal spring closure (one-way control) or pneumatic closure joint (two-way control). The glue outlet is a 1/4 "NPT, which can be used with various needles. This valve is the only type that can be used with various types of needles.

TS5322 mini shaft rubber valve

The mini shaft series is designed to provide better accuracy under low pressure. The operation mode of this series is similar to that of TS941 rubber valve, but the size is smaller. The output ○ adopts 1/8 inch NPT standard thread.

Typical applications

The shaft rubber valve can be widely used, such as: flux, oil, RTV silicon Likang, UV curing adhesive, solder paste.

Product Specifications

Axle valve model	TS941	TS5322
Length	4.7〞(119 mm)	4.0〞(101.6 mm)
Diameter	1.5〞(38 mm)	1〞(25 mm)
Weight	1.61 lb (726g)	0.31 lb (141g)
Gel contact parts	303 SS, UHMWPE	303 SS, anodized AI
	EPR	Teflon®(Teflon), EPR
Viscosity range	5-3000 kcps	5-1000 kcps
Maximum liquid pressure	2500 psi (172.4 bar)	500 psi (34.5 bar)
Actuation pressure	70 psi (4.8 bar)	70 psi (4.8 bar)
Feeding port	3/8〞NPT	1/8〞NPT
outlet	1/4〞NPT	1/8〞NPT
Fixed seat size	1.5 "diameter	1/4〞-20 UNC-2B