VERY CURE

Home page

The main purpose of the VERYCURE is the following of the optical parts and micro parts of the ultraviolet curable adhesive. lamp optical axis adjustment is very simple. Lamp is exchanged from the back panel, without tools, as long as one touch can exchange Lamp. The exchange operation time is less than one minute.

Classification:

UV light source curing equipment

Tag:

LTE

Message

Product Details

Main uses of VERYCURE

UV-hardening adhesive

Optical parts and micro-parts.
Laying of liquid crystal and various filters.
Flexible substrate for electrode protection.
End processing of Motor coil.
Fixing of various electronic parts.
Repair of vehicle glass, etc.
The formation of Damper gel.

UV Ink

Cured, Drying

ultraviolet fluorescent flaw detector

Examine the metal pipe for scratches or damage.
Inspection of turbine blades for scars.
Inspect the interior of the axle or the bearing for scars.

Use of ultraviolet light

cultivation of plants or insects.
Development of cosmetics.
Stripping of the Resist.

Product Features

A 200W mercury Xenon lamp with high intensity UV output.
Adoption high-performance Flexible optical conduit.
Dimming and shading everyone adopted Stepping motor.
1 Stage = 8 Step, the maximum can be set to 8 Stage arbitrary irradiation pattern,
Each Stage can be called out according to the external Remote.
Since the suction part is on the front panel and the exhaust part is on the back panel, several sets of this equipment can be closely equipped.
Lamp optical axis adjustment is very simple. The exchange of Lamp is carried out from the back panel, without tools, as long as one touch can exchange Lamp. The exchange operation time is less than one minute.

Product specifications

Use Lamp ‧ ‧ Mercury Xenon Lamp (Type 200U)
Lamp freeze DC23V 8.5A (freeze)
Lamp Power 200W (freeze frame)
Lamp life expectancy ‧ ‧ ‧ 4000 hours * 1
Initial UV intensity over ‧ ‧ 4000mW/cm2 (at 365nm)* 2
(* 1 The average life here does not refer to the guaranteed life.)
(* 2 The light pipe is a value of about 10mm from the exit NQLG1-50-10)
Weight of about 10kg
Appearance size: 160(W)× 265(H)× 375(D)mm (please refer to the appearance size chart)
External size (light source device host)
Technical Data