Pipe Sealant -5500 Series

Home page

LETBOND®Pipeline sealant can fully solve the sealing needs of various industrial pipelines. Whether gas lines, tubing or water pipes. LETBOND®The sealant can prevent loosening and falling off caused by vibration, and also has good chemical resistance and compressive strength.

Classification:

LETBOND adhesive

Tag:

LTE

Message

Product Details

Pipe Sealant LET-SEAL5500 Series

Thread sealing 5500 series

LETBOND®Pipeline sealant can fully solve the sealing needs of various industrial pipelines. Whether gas lines, tubing or water pipes.
LETBOND®The sealant can prevent loosening and falling off caused by vibration, and also has good chemical resistance and compressive strength.

Other Features:

General hand tools can be used for disassembly.
The use of the sealant will not contaminate the inside of the pipe, and the thread sealant that flows out will not solidify, so the pipe will not be blocked.
The thread gap can be completely sealed to prevent leakage at the pipe connection.
The pipeline sealant has a lubricating effect and can reduce friction during pipeline assembly, so the locking torque is easy to control.
You can make the adjustment before the sealant hardens.

Use steps:

If it is a plastic pipe, it should be tested and used with a catalyst before use.
Before use, clean the oil on the pipe thread.
To prevent the sealant from contaminating the inside of the tube, do not apply the sealant to the first two teeth.
It is recommended to use catalysts for inactivation of metal surfaces, such as nickel, stainless steel, copper alloys, and plated metals.

Product Application

Pipe Sealant 5500 Series	Scope of application
5545	Fast-curing, high-pressure line sealant, does not contaminate the line, does not block the valve or filter system.
5554	Resistant to chemical media, used for sealing refrigeration piping systems.
5567	Can be high temperature to 260 ℃, solvent resistance, for 2 inches below the pipe thread seal, especially suitable for stainless steel pipe.
5569	Suitable for hydraulic and pneumatic pipelines, non-polluting pipelines, medium strength.

Litbon Product Selection Table-Pipe Sealant
Product Number	Order Number	Packaging	Characteristics	Viscosity (CP)	Maximum withstand voltage Mpa	Accelerator for curing speed/ No accelerator	Temperature resistance range
5545	554505 554525	50 g 250 g	Purple High Strength Sealant, Non-Removable, Gas Line Adhesive	10,000 ~ 14,000	70	10 minutes/12 hours	-55~150 ℃
5554	555405 555425	50 g 250 g	Special for red refrigeration pipeline, anti-cold coal	1,500 ~ 3,500	69	10 minutes/24 hours	-55~150 ℃
5567	556705	50 g	White low strength, excellent hardening speed, suitable for stainless steel pipeline	Paste	69	10 minutes/60 hours	-55~260 ℃
5569	556905 556925	50 g 250 g	Medium strength, easy to disassemble, suitable for valve pipes, such as air compressor joints	350 ~ 550	68	15 minutes/20 hours	-55~260 ℃
5577	557705	50 g	Yellow medium strength, rough pipe sealant, suitable for gas pipe sealing, with instant sealing effect	> 50,000	70	15 minutes/12 hours	-55~150 ℃