Cylindrical Component Holder -6600 Series

Home page

LET-LOK high-strength single-agent anaerobic adhesive series products are suitable for the adhesive fixing of round parts such as bearings, bushings, bushings, bolts and pulleys. LETBOND®The round fitting fixative complies with a number of international standards.

Classification:

LETBOND adhesive

Tag:

LTE

Message

Product Details

Round fittings fixative LET-LOK 6600 series

Retaining adhesives 6600 series

LETBOND®The LET-LOK high-strength single-agent anaerobic adhesive series products are suitable for the adhesive fixing of round parts such as bearings, bushings, bushings, bolts and pulleys.
LETBOND®Round fittings fixative in line with a number of international standards.

Other Features:

If it is a slip fit assembly, the fixing agent can fill the gap between the metal surfaces, which can form a fixing effect and prevent corrosion of the adhesive surface.
The fixative does not begin to cure until the parts are assembled.
In addition to fixing, at the same time has the role of sealing and leak-proof.
The use of fixing agent can avoid the stress caused by thermal expansion and contraction of parts or press-fitting, and prevent parts from being classified or deformed.

Use steps:

Remove the grease on the surface of the adhesive. LETBOND can be used.®Clean the surface of the adhesive with detergent.
A catalyst should be used for inactive metals to ensure complete cure.
Anaerobic fixatives are not suitable for plastic fittings.

Round fittings fixative 6600 series	Scope of application
6603	Green low viscosity fast curing fixative, can be used in can not completely remove oil surface and parts, with oil resistance.
6609	Green high strength, low viscosity fixative.
6620	Green high strength, high viscosity fixative.
6638	Green high-strength round fittings fixing agent, high viscosity, fast curing.
6648	Light green high strength fast curing fixative, temperature resistance to 175 ℃.
6660	Silver gray paste fast curing fixing agent, suitable for repairing all kinds of worn machine parts, such as worn shaft core, shaft sleeve, etc., filling the gap up to 0.5mm, used with catalyst.
6680	Green high-strength fixing agent, suitable for structural parts assembly.

Litebang Product Selection Table-Circular Fixing Agent
Product Number	Order Number	Packaging	Color	Characteristics	Viscosity (CP)	Shear Strength (kgf/cm2) Steel/Steel	Preliminary curing time (minutes)	Full cure time (hours)	Filling gap (mm)max	Temperature range (℃)
6603	660305 660325 660300	50 g 250 g 1000 g	Green	Green medium strength, oil content	100 ~ 150	≧ 184	10	24	0.10	-55~150 ℃
6609	660905 660925 660900	50 g 250 g 1000g	Green	Green color standard Huai curing agent, high strength, suitable for tight parts	110 ~ 140	≧ 211	10	24	0.15	-54~150 ℃
6620	662005 662025 662000	50 g 250 g 1000 g	Green	Green, high temperature, suitable for fixed parts above 100 ℃	6,000 ~ 8,000	≧ 173	10~15	24	0.4	-54~200 ℃
6638	663805 663825 663800	50 g 250 g 1000 g	Green	Green high strength holding agent, high viscosity, suitable for pipe fittings bonding	2,000 ~ 3,000	≧ 255	10~15	24	0.25	-54~150 ℃
6648	664805 664825 664800	50 g 250 g 1000 g	Green	Light green high strength high temperature resistant holding agent	400 ~ 600	≧ 255	15	24	0.15	-54~150 ℃
6660	666005 666025 666000	50 g 250 g 1000 g	silver gray	High viscosity, fast fixing type	Paste	≧ 122	15	24	0.5	-55~150 ℃
6680	668005 668025 668000	50 g 250 g 1000 g	Green	High strength, medium viscosity for sliding fit without disassembly	1,200 ~ 2,000	≧ 197	15	24	0.25	-54~150 ℃